온도1채널

Lyophilization Temperature Data Logger OM-CP-LYOTEMP

by 서호 posted Jul 17, 2018
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

크게 작게 위로 아래로 댓글로 가기 인쇄

OM-CP-LYOTEMP 데이터 로거는 동결건조와 같은 공정을 위한 초저 작동 온도에서 사용하도록 설계되었습니다. OM-CP-LYOTEMP의 작동 범위는 -60 ~ 75°C(-76 ~ 167°F)이며 길고 얇고 유연한 케이블 형태의 밀폐된 서미스터 온도 감지 소자로 설계되어 모니터링에 이상적입니다. 동결 건조 과정에서 제품.

이 데이터 로거는 생물학적 의약품 준비, 혈장 및 적혈구 냉동고 모니터링 또는 드라이아이스 선적을 포함한 광범위한 응용 분야에 대해 스마트하고 저렴한 솔루션을 제공합니다. 컴팩트한 크기와 간단한 작동으로 OM-CP-LYOTEMP는 사용자 친화적이고 신뢰할 수 있습니다. 이 데이터 로거에는 장치에서 사용할 수 있는 로깅 상태와 수동 시작 및 중지 옵션을 사용자에게 경고하거나 알려주는 3개의 LED 표시기가 있습니다. OM-CP-LYOTEMP의 다른 기능에는 지연된 시작 구성, 실시간 기록, 사용자 구성 가능한 경보 및 암호 보호가 포함됩니다. OM-CP-LYOTEMP는 최소한의 유지 관리가 필요하며 평균적으로 사용하면 연간 보정이 필요합니다.

OM-CP-LYOTEMP는 USB 도킹 스테이션(별도 판매)을 사용하여 개인용 컴퓨터 또는 노트북과 통신합니다. OM-CP-LYOTEMP는 날짜 및 시간 스탬프가 찍힌 온도 판독값을 제공합니다. 나머지는 사용하기 쉬운 Windows® 소프트웨어가 처리합니다. 사용자는 그래픽 또는 표 형식으로 데이터를 볼 수 있습니다. 상한 및 하한 경보 한계와 상한 및 하한 경고 한계는 소프트웨어를 통해 프로그래밍할 수 있습니다. 기타 소프트웨어 기능: 다중 그래프 오버레이, 통계, 디지털 보정, 확대/축소/축소, 치사 방정식(F0, PU), 평균 운동 온도, 데이터 주석, 최소/최대/평균 라인, 데이터 테이블 보기, 자동 보고서 생성 및 요약 보기.

OM-CP-MICRODISC는 OM-CP-LYOTEMP 데이터 로거와 함께 사용하도록 설계된 표면 온도 프로브 부착물입니다. 이 견고한 디스크 프로브 부착물은 황동으로 만들어졌으며 OM-CP-LYOTEMP의 서미스터 온도 프로브의 팁에 직접 연결하도록 형성되었습니다. OM-CP-MICRODISC는 사용자가 표면 온도 모니터링이 필요한 프로세스를 수행할 수 있도록 특별히 설계되었습니다.

OM-CP-MICRODISC는 컴팩트한 크기, 퍽 같은 모양 및 넓은 작동 범위를 통해 평평한 표면과 밀접하게 접촉할 수 있어 동결건조 과정에서 선반의 정확한 온도 모니터링을 보장합니다. OM-CP-MICRODISC에는 데이터 로깅 프로세스 전반에 걸쳐 프로브 연결을 보호하는 실리콘 고무 인서트가 장착되어 있습니다.

SPECIFICATIONS
Temperature Sensor: NTC Thermistor
Temperature Range: -60 to 75°C (-76 to 167°F)
Temperature Resolution: 0.1°C
Calibrated Accuracy: ±0.5°C
Reading Rate: 1 reading every 5 seconds up to 1 reading every 30 minutes
Memory: 32,767 readings; software configurable memory wrap
Start Modes: Software programmable immediate start, delay start up to 30 days in advance or manual start with magnetic switch.
Temperature Alarm: Software programmable high and low alarm limits, high and low warn limits; each set point may be individually enabled or disabled
Alarm Delay: Software programmable time delay for warn/alarm limits. Logger will not indicate out of range status until the temperature has been out of range for a set period of time.
LED Status Indicators
    Green: Blinks to indicate safe conditions during logging
    Yellow: Blinks to indicate warn limits have been exceeded
    Red: Blinks to indicate alarm criteria (limits/delay) have been exceeded
Password Protection: An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password.
Calibration: Digital calibration through software
Calibration Date: Automatically recorded within device
Power: 3.6V lithium battery (included), factory replaceable only
Battery Life: 1 year typical at a 10 minute reading rate
Data Format: Date and time stamped °C, °F, K, °R
Time Accuracy: ±5 minutes/month at -80°C (-112°F)
Computer Interface: USB docking station to PC; 38,400 baud
Software: XP SP3/Vista/7 and 8 (32-bit and 64-bit)
Operating Environment: -60 to 75°C (-76 to 167°F); 0 to 100% RH
Dimensions:
    Body: 82.5 H x 53.3 W x 10.3 mm D (3.25 x 2.1 x 0.41")
    Probe Length: 121.9 cm (48")
Ingress Protection (IP Rating): IP50
Enclosure: ABS plastic, white, polycarbonate labeling
Weight: 1.4 oz (40 g)

OM-CP-MICRODISC
Material: Brass (C46400), silicone rubber insert
Dimensions: 6.5 H x 25 mm dia (0.25 x 0.97")
Operating Environment: -60 to 177°C (-75 to 350°F), 0 to 100% RH

 OM-CP-LYOTEMP_l.jpg

 

 

www.seoho.biz

서호 전북 전주시 덕진구 혁신로 586 (54851)

Tel. 063-214-9325 / Fax. 063-214-9328

seoho@seoho.biz