Sanitary pressure gauge_P750 series

by anonymous posted Mar 20, 2018
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

가 크게 작게 위로 아래로 댓글로 가기 인쇄

프레젠테이션1ㅈ.jpg

 

Service intended

P750 series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present, and it could be used for a chemical, food, beverage, biochemical, and pharmaceutical industry.

Nominal diameter 63, 80 and 100 mm
Accuracy 63 and 80 mm : ±1.6 % of full scale
100 mm : ±1.0 % of full scale
Pressure range (MPa, kPa, bar) Steady : 75 % of full scale (63 and 80 mm)
             100 % of full scale (100 mm)
Over range protection : 130 % of full scale
Working pressure Steady : 75 % of full scale
Over range protection : 130 % of full scale
Working temperature Ambient : -20 ~ 65 °C
Fluid : Max. 121 °C
Temperature effect Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±0.5 % per 10 ℃ of full scale
 

Standard features

Process connection 316SS
P751 : 1½" and 2" Nut
P752 : 1", 1½", 2", clamp connection
P753 : PF¾", PF1", PF1½", male screw
P754 : Standard and non standard flange
P755 : Homogenizer
P756 : Homogenizer flange (95 x 43 x 28 mm)
Body Stainless steel (316SS)
Diaphragm Stainless steel (316L SS)
Electropolished diaphragm
Ra 12 ~ 20 ㎛
System filling Food grade oil (FDA certified)
Certificates ATEX Ex II GD c IIC TX
 

www.seoho.biz

㈜서호 전북 전주시 덕진구 혁신로 586 (54851)

Tel. 063-214-9325 / Fax. 063-214-9328

seoho@seoho.biz

위로 아래로 댓글로 가기 인쇄