HOFFER Digital to Analog Converter Mag Type (for use with Lo-Co and TriFlo Series) Product Bulletin PET-102D

by 서호 posted May 25, 2018
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

크게 작게 뷰어로 보기 위로 아래로 댓글로 가기 인쇄

MODEL NUMBERS
PET-1 0 to 10 VDC analog output
PET-3 4 to 20 mA analog output 3-wire
PET-7 4 to 20 mA analog output 2-wire

The PET Series converter receives frequency input and
converts it to a proportional 4-20mA or 0-10V analog
output. It has been designed to fit a compact "ELBY"
explosion-proof enclosure. The frequency range is field
selectable to fit most applications. ZERO and SPAN
adjustments make it easy to calibrate to almost any
measurement range. This PET is designed for use with
the Lo-Co Series and TriFlo Series flowmeters.

 

SPECIFICATIONS
Supply Voltage: 9 — 30 VDC
Supply Current: < 4.0 mA
Input Protection: 100 VAC, reversed leads
Output Protection: Short to 0 VDC, Common or
Signal out Continuous
Frequency Input Range F: Hi: max full scale 10 kHz
min full scale 1100 Hz
Lo: max full scale 1200 Hz
min full scale 75 Hz
Input Sensitivity: Standard 12 mVpp
Linearity: 0.5% max., 0.15% typical
Output Settling Time: Full scale change to 95% of final
value 100mS to 3 sec
Output Ripple and Noise: .2 mA max p-p, 1% of full scale
.02 mA typical, .01% of full
scale
Temperature Coefficient: 25° to 40°C, 0.13%/°C
Operating Temp. Range: -40° to +85°C (-40° to +185°F)
ZERO/SPAN Adjustment Interaction: < 1%
3 WIRE OUTPUT VERSION: 20 mA Range
Minimum Output Current: 0.07 mA
Maximum Output Current
(Full Scale Min. Cal., Zero Cal. Set to 4 mA): 24.1 mA
Load Resistance:
<(+V - 6v)/ 20 mA output: +V=12v: < 300 ohms
+V=24v: < 900 ohms
Terminal Connections: 1. Input VDC 4. Mag Pickup
2. Common 5. Mag Pickup
3. Signal Out
CE-Compliance: EN55011, EN55022-2pet.jpg

 

 

www.seoho.biz

서호 전북 전주시 덕진구 혁신로 586 (54851)

Tel. 063-214-9325 / Fax. 063-214-9328

seoho@seoho.biz