Feature

■ Always displays current, maximum, and minimum temperatures

■ Enables to monitor an accepted range of temperature variation at a glance

■ Switches between the internal sensor and the external probe

- Temperature at the internal sensor (IN) is displayed when the probe is unconnected.

- Temperature at the external probe (OUT) is displayed automatically when the probe is connected.

■ Placeable in refrigerators

- For a freezer, do not put the whole unit inside of it. Insert only the external probe inside the door.

- Be careful not to cause condensing by excessive opening and closing of doors.

■ External probe with a flat cable

- A flat cable makes it easy to go through a gap of doors on a fridge and a freezer.

■ IPX5 waterproof

- Safe to use in an environment with water splashes

■ Resolution 0.1°C

- Good for precise monitoring

■ Be hygienic

- Contains antimicrobial in the body.

- Sensor part in the external probe is made of hygienic stainless steel.

■ Three ways to install

 

Description

■ Maximum and minimum temperature is reset when either one of the following conditions is met:

- When the battery is replaced

- When the reset key is pressed

Specifications

Cat. No.		1830-00
Product name		Refrigerator Digital Thermometer
Model name		PC-3310
Measuring range	Internal sensor	−5.0 to 50.0°C
	External probe	−50.0 to 70.0°C
Accuracy		±1.0°C (0.0 to 40.0°C) ±2.0°C (other)
Resolution		0.1°C
Sampling time		10 seconds
Indicated items		Current temperature, maximum temp., minimum temp.
Waterproofness		IPX5 waterproof * Resists water only when the connector cap is closed, or the external probe is connected. * Do not put the probe underwater.
Operating ambient		−5 to 50°C, less than 80%rh without condensing
Power		AAA battery x1
Battery life		Approx. 2 years under room temperature, with alkaline battery
Material	Body	ABS resin with antimicrobial, silicone rubber
	External probe	Sensor part: SUS304, PE resin Cable: PVC resin (heat-resistant up to 50°C)
Dimensions	Body	67 (W) × 65 (H) ×22 (D) mm
	External probe	Sensor part: Ø5.5 × 11 mm (resin part Ø7.9 mm) Cable: 3 m long
Weight		71 g including battery
Accessories		AAA battery x1, clasp for holding external probe x1, instruction manual