HART® Fiielld Communiicattiion Prrottocoll
5 Diigiitt Ratte,, 8 Diigiitt Tottalliizerr LCD diisspllay wiitth conffiigurrablle
deciimall poiintt llocattiion
8 Diigiitt,, Non--rressettttablle Grrand Tottall diisspllay
Pullsse IInputt ssupporrttss tturrbiine ass wellll ass many ottherr pullsse generrattiing
ffllowmetterrss
4--20mA Anallog Outtputt
Up tto 20 Poiintt Liinearriizattiion
Opttiionall Scalled Pullsse Outtputt rreprressenttiing an iincrrementt off vollume
fforr each pullsse
Two Opttiionall Allarrm Outtputtss conffiigurrablle fforr Ratte and Tottall
Magnettiicalllly operratted sswiittch fforr Tottall rressett
IIntterrnall batttterry backup
Conffiigurrattiion and Grrand Tottall ssttorred iin non--vollattiille memorry;;
Grrand Tottall ssaved once perr miinutte
Featuring 5 digits of rate and 8 digits of total, the HRT1 is a loop powered indicator capable of accepting magnetic
pickup, DC pulse or switch closure inputs. The HRT1 uses the 4-20mA loop to provide power when this output is
used and to provide the HART® communication link.
TOTAL DISPLAY:
8 Digits 0.26” high. Resettable
Total Units: GAL, LIT, FT3, M3, BBL &“blank”
GRAND TOTAL:
8 Digits 0.26” high, Non-resettable. Value stored once per
minute in non-volatile memory. Grand Total is displayed for
15 seconds after pressing the button.
RATE DISPLAY:
5 Digits 0.5” High, Display updates once every two seconds
Rate Units: /SEC /MIN /HR /DAY
K-factor: The pulses per unit of Total (e.g. pulses/gallon) are
configurable in the range 0.001 to 99,999,999
Linearization: Up to 20 points
Decimal Points: Configurable for 0, .0, .00 or .000 for
rate and total
Accuracy: Total: ±1 count, Rate: ±0.01%
INPUTS
Magnetic Pickup:
Frequency Range: 0.2 Hz to 5000 Hz
Signal Level: 30 mVp-p to 30Vp-p
Opto-Isolated DC Pulse:
Frequency Range: 0 Hz to 3000 Hz
Signal Type: DC Pulse
High (Logic 1): 4 to 30 VDC
Low (Logic 0): <1 VDC
Min Pulse Width: 0.1 msec
Contact Closure:
Frequency Range: 0 to 5000 Hz
Signal Type: Contact closure, Sig+ Terminal to DC common
Internal Pull-up: 220 K to +3.3 VDC
Reset:
Signal Type: Contact closure, Reset Terminal to DC common
Min On: 25 msec
Internal Pull-Up: 100K to +3.3 VDC
External Magnet: Activates internal magnetic switch
www.seoho.biz
㈜서호 전북 전주시 덕진구 혁신로 586 (54851)
Tel. 063-214-9325 / Fax. 063-214-9328
seoho@seoho.biz