사용자의 작업과 함께 성장해온 공기압 압력 교정기는 현재와 미래에서 다양한 업무를 해결합니다.
Fluke Calibration 2271A 산업용 압력 교정기는 매우 다양한 압력 게이지와 센서를 교정하기 위한 완벽하고 자동적인 솔루션을 제공합니다. 모듈 방식의 디자인은 다양한 요구와 예산에 맞는 장비 구성을 할수 있게 하고, 다양한 교정범위의 확장을 가능하게 합니다.
2271A는 넓은 범위의 교정을 하나의 장비에서 공급할 수 있기 때문에 교정실에서의 압력교정에 가장 이상적입니다. 압력 교정에서 사용자가 필요한 모든 것들을 포함되어 있습니다; 그저 공급 압력만 연결하십시오. 그리고 2271A를 선택한다는 것은 장기간의 관점에서 훌륭한 선택입니다: 사용자의 작업이 성장하고 바뀜에 따라 2271A 역시 성장하고 바뀔 것입니다. 단지 측정 모듈을 더하기만 하면 됩니다.
2271A는 또한 최근 압력 트랜스미터와 게이지를 교정하고 그들의 용량을 확장하기를 원하거나 보다 과정을 효율적으로 만들고자하는 실험실에 매우 적합합니다. 2271A는 설정 및 사용이 쉽습니다. 따라서 사용자는 가장 숙련된 기술자들에게 이를 부탁하지 않아도 됩니다. 그리고 완전히 자동화될 수 있어 사용자의 실험실이 더 효율적으로 운영될 수 있도록 도와줍니다.
만약 사용자가 현장 작업으로 인한 오염을 걱정한다면, 2271A는 당신에게 매우 좋은 선택인 것입니다. 옵션인 오염 방지 시스템(Contamination Prevention System, CPS)이 만연하는 위험 요소로부터 중요한 보호 장치를 제공합니다.
직관적인 외관 디자인 뿐만 아니라 10개의 언어로 제공되어 선택할 수 있는 그래픽 사용자 인터페이스와 직관적인 메뉴 구조는 2271A를 매우 쉽게 배우고 사용할 수 있게 합니다.
2271A 주요특징
- 다양한 게이지와 센서의 넓은 범위를 하나의 장비로 교정
- -100 kPa 부터 20MPa (-15부터 3000 psi)의 넓은 측정범위
- 탈부착 가능한 압력 측정 모듈로 측정 범위를 쉽게 바꾸거나 추가 가능
- 통합된 전기 측정 모듈이 압력 트랜스미터 교정을 위한 완벽한 솔루션 제공
- 탑재된 이중 테스트 포트로 다양한 시험 중인 장비를 연결 가능(DUTs)
- 0.02% FS 압력 측정 불확실성
- 10개의 언어로 제공되어 현지화할 수 있는 그래픽 사용자 인터페이스
General specifications | |
Power requirements | 0 V ac to 240 V ac, 47 Hz to 63 Hz |
Fuse | T2A 250 V ac |
Max power consumption | 100 W |
Operating ambient temperature range | 15 °C to 35 °C |
Storage temperature | -20 °C to 70 °C |
Relative humidity | Operating: <80 % to 30 °C, <70 % to 35 °C |
Storage: <95 %, non-condensing. A power stabilization period of four days may be required after extended storage at high temperature and humidity. | |
Vibration | MIL-T-28800D CLASS 3 |
Altitude (Operation) | <2000 m |
Ingress protection | IEC 60529: IP20 |
Safety | IEC 61010-1, Installation Category II, Pollution degree 2 |
Warmup time | 15 minutes typical |
Weight (chassis only) | 15 kg (33.06 lbs) |
Dimensions | Height: 2271A-NPT-HC20 305 mm (12 in) |
2271A-BSP-HC20 305 mm (12 in) | |
2271A-NPT-P3K 237 mm (9.33 in) | |
2271A-BSP-P3K 237 mm (9.33 in) | |
Width: 442 mm (17.40 in) | |
Depth: 446 mm (17.55 in) |
Control specifications | ||
Control Precision (Dynamic Mode) | PM200-BG2.5K | 0.005% Range Span |
All other ranges | 0.001 % Range Span | |
Control turndown | 10:1 (Typical) | |
Low control point | 1 kPa (0.15 psi) absolute | |
Control turndown is defined as the relationship between the provided supply pressure and the appropriate supply pressure for the range. For example, a unit with a 7 MPa (1000 psi) and 700 kPa range (100 psi) with a supply pressure of 7.7 MPa (1100 psi) provides control precision of 0.001 % range because 7 MPa is 10 times greater than 700 kPa. A system with ranges of 20 MPa (3000 psi) and 700 kPa (100 psi) with supply pressure of 22 MPa (3300 psi) will have 0.001 % range control precision on the 20 MPa range but only 0.003 % control precision on the 700 kPa range. Control precision of 0.001 % on the low range can be achieved by reducing the supply pressure. |
Supply pressure requirements Clean dry air or nitrogen (industrial grade, 99.5 %) | |
Maximum particulate contamination | ≤ 1.25 micrometer (50 microinches) |
Maximum moisture content | -50 °C dew point |
Maximum hydrocarbon content | 30 ppm |
Interface/ communications | |
Primary remote interfaces | Ethernet, RS232, USB |
Electrical Measurement Module (EMM) | |
Connection | Standard 4 mm jack |
Maximum 30 V dc w.r.t. chassis ground | |
Aux drivers | 4 external solenoid drivers |
24 V dc. 100 % duty cycle when turned, reducing to 40 % shortly after. |
Pressure measurement specifications | ||||
PM200 Modules | ||||
Model | Range (SI units) | Range (Imperial units) | Measurement mode | 1 year specification (%FS) |
PM200-BG2.5K | -2.5 kPa to 2.5 kPa | -10 inH₂0 to 10 inH₂0 | gauge | 0.20 % |
PM200-BG35K | -35 kPa to 35 kPa | -5 psi to 5 psi | gauge | 0.05 % |
PM200-BG40K | -40 kPa to 40 kPa | -6 psi to 6 psi | gauge | 0.05 % |
PM200-BG60K | -60 kPa to 60 kPa | -9 psi to 9 psi | gauge | 0.05 % |
PM200-A100K | 2 kPa to 100 kPa | 0.3 psi to 15 psi | absolute | 0.10 % |
PM200-BG100K | -100 kPa to 100 kPa | -15 psi to 15 psi | gauge | 0.02 % |
PM200-A200K | 2 kPa to 200 kPa | 0.3 psi to 30 psi | absolute | 0.10 % |
PM200-BG200K | -100 kPa to 200 kPa | -15 psi to 30 psi | gauge | 0.02 % |
PM200-BG250K | -100 kPa to 250 kPa | -15 psi to 36 psi | gauge | 0.02 % |
PM200-G400K | 0 kPa to 400 kPa | 0 psi to 60 psi | gauge | 0.02 % |
PM200-G700K | 0 kPa to 700 kPa | 0 psi to 100 psi | gauge | 0.02 % |
PM200-G1M | 0 MPa to 1 MPa | 0 psi to 150 psi | gauge | 0.02 % |
PM200-G1.4M | 0 MPa to 1.4 MPa | 0 psi to 200 psi | gauge | 0.02 % |
PM200-G2M | 0 MPa to 2 MPa | 0 psi to 300 psi | gauge | 0.02 % |
PM200-G2.5M | 0 MPa to 2.5 MPa | 0 psi to 360 psi | gauge | 0.02 % |
PM200-G3.5M | 0 MPa to 3.5 MPa | 0 psi to 500 psi | gauge | 0.02 % |
PM200-G4M | 0 MPa to 4 MPa | 0 psi to 580 psi | gauge | 0.02 % |
PM200-G7M | 0 MPa to 7 MPa | 0 psi to 1000 psi | gauge | 0.02 % |
PM200-G10M | 0 MPa to 10 MPa | 0 psi to 1500 psi | gauge | 0.02 % |
PM200-G14M | 0 MPa to 14 MPa | 0 psi to 2000 psi | gauge | 0.02 % |
PM200-G20M | 0 MPa to 20 MPa | 0 to 3000 psi | gauge | 0.02 % |
Notes
- Gauge mode modules (PM200-GXXX or PM200-BGXXX) with ranges of 100 kPa (15 psi) or greater will support absolute mode measurement when used with a Barometric Reference Module.
- For temperatures from 15 °C to 18 °C and 28 °C to 35 °C, add 0.003 % FS/°C.
- Uncertainty for gauge mode modules assumes routine zeroing. Uncertainty for absolute-mode modules includes 1-year zero stability.
- This specification can be reduced to 0.05 % FS if the PM200 module is zeroed on a continuing basis to remove the 1-year zero stability component.
- Instrumental measurement uncertainty for gauge mode modules used in absolute mode by addition of a barometric reference module is calculated as the uncertainty of the gauge mode module plus the uncertainty of the Barometric Reference Module.
Model Name | 설명 |
---|---|
2271A-NPT-HC20 |
Industrial Pressure Calibrator Chassis, NPT Manifold, HC20 Test Port Connections |
2271A-NPT-P3K |
Industrial Pressure Calibrator Chassis, NPT Manifold, P3000 Test Port Connections |
2271A-BSP-HC20 |
Industrial Pressure Calibrator Chassis, BSP Manifold, HC20 Test Port Connections |
2271A-BSP-P3K |
Industrial Pressure Calibrator Chassis, BSP Manifold, P3000 Test Port Connections |
2271A-N-G20M |
Pressure Calibrator, NPT, PM200-G20M, 20 MPA (3000 PSI) |
2271A-N-G7M |
Pressure Calibrator, NPT, PM200-G7M, 7 MPA (1000 PSI) |
2271A-N-G2M |
Pressure Calibrator, NPT, PM200-G2M, 2 MPA (300 PSI) |
2271A-N-G20M/G250K |
Pressure Calibrator ,NPT, PM200-G20M/BG250K, 20 MPA (3000 PSI) |
2271A-N-G20M/G2M |
Pressure Calibrator, NPT, PM200-G20M/G2M, 20 MPA (3000 PSI) |
2271A-N-G2M/BG200K |
Pressure Calibrator, NPT, PM200-G2M/BG200K, 2 MPA (300 PSI) |
2271A-N-BG200/2.5K |
Pressure Calibrator, NPT, PM200-BG200K/BG2.5K, 200 KPA (30 PSI) |
2271A-N-G7M/G700K |
Pressure Calibrator, NPT, PM200-G7M/G700K, 7 MPA (1000 PSI) |
2271A-N-G2M/A100K |
Pressure Calibrator, NPT, PM200-G2M/A100K, 2 MPA (300 PSI) |
2271A-N-G2M/BG100K |
Pressure Calibrator, NPT, PM200-G2M/BG100K, 2 MPA (300 PSI) |
PM200-BG2.5K |
압력 측정 모듈, - 2.5 ~ 2.5 kPa - 10 ~ 10 inH20 |
PM200-BG35K |
압력 측정 모듈, -35 ~ 35 kPa (-5 ~ 5 psi) 게이지 |
PM200-BG40K |
압력 측정 모듈, -40 ~ 40 kPa (-6 ~ 6 psi) 게이지 |
PM200-A100K |
압력 측정 모듈, 100 kPa (15 psi) 절대 |
PM200-BG100K |
압력 측정 모듈, -100 ~ 100 kPa (-15 ~ 15 psi) 게이지 |
PM200-A200K |
압력 측정 모듈, 200 kPa (30 psi) 절대 |
PM200-BG200K |
압력 측정 모듈, -100 ~ 200 kPa (-15 ~ 30 psi) 게이지 |
PM200-BG250K |
압력 측정 모듈, -100 ~ 250 kPa (-15 ~ 36 psi) 게이지 |
PM200-G400K |
압력 측정 모듈, 0 ~ 400 kPa (0 ~ 60 psi) 게이지 |
PM200-G700K |
압력 측정 모듈, 0 ~ 700 kPa (0 ~ 100 psi) 게이지 |
PM200-G1M |
압력 측정 모듈, 0 ~ 1 MPa (0 ~ 150 psi) 게이지 |
PM200-G1.4M |
압력 측정 모듈, 0 ~ 1.4 MPa (0 ~ 200 psi) 게이지 |
PM200-G2M |
압력 측정 모듈, 0 ~ 2 MPa (0 ~ 300 psi) 게이지 |
PM200-G2.5M |
압력 측정 모듈, 0 ~ 2.5 MPa (0 ~ 360 psi) 게이지 |
PM200-G3.5M |
압력 측정 모듈, 0 ~ 3.5 MPa (0 ~ 500 psi) 게이지 |
PM200-G4M |
압력 측정 모듈, 0 ~ 4 MPa (0 ~ 580 psi) 게이지 |
PM200-G7M |
압력 측정 모듈, 0 ~ 7 MPa (0 ~ 1000 psi) 게이지 |
PM200-G10M |
압력 측정 모듈, 0 ~ 10 MPa (0 ~ 1500 psi) 게이지 |
PM200-G14M |
압력 측정 모듈, 0 ~ 14 MPa (0 ~ 2000 psi) 게이지 |
PM200-G20M |
압력 측정 모듈, 0 ~ 20 MPa (0 ~ 3000 psi) 게이지 |
Accessories common to all models:
액세서리 | 설명 |
---|---|
CASE-2271 |
Shipping Case, 2271A |
CASE-PMM |
장비케이스, 3 PMM 모듈 |
CPS-2270-20M-P3K |
Contamination Prevention System 20 MPa (3000 psi), P3000 Test Port Connection |
CPS-2270-20M-HC20 |
Contamination Prevention System 20 MPa (3000 psi), HC20 Test Port Connection |
PK-2271-NPT-HC20 |
Lines and Fittings Kit, 2271A NPT-HC20
|
PK-2271-NPT-P3K |
Lines and Fittings Kit, 2271A-NPT-P3KPK |
PK-2271-BSP-HC20 |
Lines and Fittings Kit, 2271A-BSP-HC20 |
PK-2271-BSP-P3K |
Lines and Fittings Kit, 2271A-BSP-P3K |
PMM-CAL-KIT-20M |
압력 측정 모듈 교정 키트, 20MPa(3,000psi) |
VA-PPC/MPC-REF-220 |
진공 펌프 패키지, 220V |
VA-PPC/MPC-REF-110 |
진공 펌프 패키지, 110V |
www.seoho.biz
㈜서호 전북 전주시 덕진구 혁신로 586 (54851)
Tel. 063-214-9325 / Fax. 063-214-9328
seoho@seoho.biz