시리즈 2000 HA 높은 정확도 Magnehelic® 게이지는 표준 Magnehelic® 게이지 정확 두 배입니다. 잘 설계된 고정밀 Magnehelic® Gage는 측정시 시차 오류를 제거하기 위해 미러링 된 오버레이를 표준으로 제공합니다. 각 고정밀 모델에는 6 점 교정 인증서가 포함되어 있습니다. 견고한 IP67 케이스는 먼지와 물의 침투로부터 완전히 보호합니다. 재 설계된 부식 방지 브러시 처리 된 304 스테인리스 스틸 베젤 옵션은 깔끔한 테이퍼 형 디자인을 제공하지만 가장자리에 먼지가 쌓일 가능성을 최소화합니다.
Specifications
- Service:
- Air and non-combustible, compatible gases (natural gas option available). Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
- Wetted Materials:
- Consult Factory.
- Housing:
- Die cast aluminum case and bezel with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
- Accuracy:
- ±1% FS (±1.5% on -0, -100PA, -125PA, -10MM and ±2% on -00, -60PA, -6MM ranges) throughout range at 70°F (21.1°C).
- Pressure Limits:
- -20 in Hg to 15 psig (-0.677 bar to 1.034 bar).
- Overpressure:
- Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on catalog page.
- Temperature Limits:
- 20 to 140°F (-6.67 to 60°C).
- Size:
- 4" (101.6 mm) diameter dial face.
- Mounting Orientation:
- Diaphragm in vertical position. Consult factory for other position orientations.
- Process Connections:
- 1/8" female NPT duplicate high and low pressure taps – one pair side and one pair back.
- Standard Accessories:
- Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters, and three flush mounting adapters with screws.
- Weight:
- 1 lb 2 oz (510 g).
- Agency Approvals:
- Meets the technical requirements of EU Directive 2011/65/EU (RoHS II).